Basic Guide to Finding Hidden Valves and Piping
If you are a homeowner then you need to know the details of your home like the back of your hand. One of the things that is especially critical is finding hidden water as well as gas piping and valves and it is important to know where they are especially if you have to deal with things like an emergency. Some of the ways that you can be able to find out where the various shut off valves are located are briefly highlighted below.
In order to locate the gas shutoff valve then you need to find out if you have natural gas since the shutoff valve will be located outside the home just before the gas meter. For the most part, most of the nubs are usually rectangular in shape and are opened using a wrench but most gas companies usually recommend that you do not touch them. If you are looking for a second valve, then you are most likely to find it down the line or where the gas pipe enters.
If you have a gas pipe then the valve will most likely be located in the utility room and will be made from flexible copper. When you have such a piping system you are usually sure that the gas system that you have usually has a high pressure. The shutoff valves of such systems are usually located near the water heater or the furnace.
For water meters, you are likely to get that you have two shutoff valves one before and the other after the meter. Cold environments usually have the shut off points located in the house so that they do not freeze. There is a high chance that if you live in milder climates, then the water shutoff valve will be located in an underground box with a lid or next to an exterior wall.
If you are finding it hard to find the valves then consider looking at property reports that you got at the last phase of the property purchase. By looking at the report, it will be easy for you to be able to find out where the water shut off valve is located. Pictures of the valves will also be drawn so that you are able to know what they look like.
With most automatic sprinklers located underground, there is a very high chance that they may be a little bit harder to find. Since such valves usually have metals then you can easily find them by using a metal detector. It is easy for you to be able to know more info. about where to start when you have a plan even though it may not point out the exact location of the valve.